How to get from Lennoxville to Sherbrooke Airport

Sherbrooke Airport is at 900, chemin de l’Aéroport, in Cookshire-Eaton. Its published position is 45° 26′ 18″ N, 71° 40′ 50″ W, and its elevation is 792 feet (241.4 metres).

The airport’s name and YSC code are useful when checking a flight or arranging a pickup. The ICAO code is CYSC. Make sure the booking or flight information refers to Sherbrooke Airport, rather than another airport in the region.

The drive from Lennoxville to Sherbrooke Airport takes about 27 minutes. The route details establish the drive time, but not a turn-by-turn route.

Before leaving, enter the airport’s full address—900, chemin de l’Aéroport, Cookshire-Eaton, Québec J0B 1M0—into a navigation tool. Check that it has selected Sherbrooke Airport (YSC), then follow the route provided. Travel time can vary, so allow more time if arrival by a particular hour matters.

Lennoxville is also home to Bishop’s University; its campus visitor guide can help with local orientation.

Confirm ground transport directly with the airport before relying on a pickup or rental. The airport says it can arrange car rentals or accommodation on request, and advises callers to phone 819-832-4314 for applicable airport rates.

The published details do not establish a regular shuttle, public-transit connection or specific pickup procedure. If someone is meeting you, agree on the arrangements and confirm where to meet at the airport. For a rental, ask about availability, pickup arrangements and applicable rates when contacting the airport.

The drive from Lennoxville takes about 27 minutes, but that figure is travel time only; it does not account for check-in, security or other flight requirements. Confirm departure details and the required arrival time with the airline or charter operator.

Sherbrooke Airport has one asphalt runway, numbered 13-31, measuring 5,900 feet (1,798 metres) long and 150 feet (45 metres) wide. Sherbrooke Airport’s published flight-partner details include commercial and charter operators, but services and schedules depend on the operator. Confirm the flight directly rather than assuming a particular route or timetable.

Confirm current operating details with Sherbrooke Airport before travelling, especially if a service beyond the flight is needed. The airport publishes terminal opening hours for fuelling and UNICOM: daily 7:00 a.m.–7:00 p.m. from May 1 through September 30, and daily 7:00 a.m.–5:00 p.m. from October 1 through April 30. These are hours for those services, so check separately for passenger or flight information.

Airport services include aircraft de-icing, 100LL and Jet A1 fuel, aircraft parking, battery boosting, ground electrical connections, aviation engine oils, space rental and a UNICOM advisory station.

Customs service requires two hours’ advance notice and is available Monday through Friday, 8:00 a.m.–4:30 p.m., excluding holidays. Confirm that the service needed is available for the trip, and check the official site before you go.